Description:

Aerospace engineering and materials meets wheels for sportbikes with Blackstone Tek's single mold production technique used on these lightweight carbon fiber wheels.  Their newest and greatest wheel yet, the RapidTEK carbon fiber wheels.

Better braking and handling performance due to the reduced unsprung weight.

All BST wheels comply with DOT standards and have gone rigorous fatigue tests to ensure they delivery a strong lightweight wheel. They also carry a two-year, limited manufacturer's warranty.

Available in gloss finish.

Weight comparison:

BST Rapid TEK for BMW S1000RR / S1000R : 16.25lbs
Factory S1000RR Cast wheels: 25.5 lbs

Front wheel size: 3.5 x 17
Rear wheel size: 6 x 17

Standard supplied bearings are steel bearings, optional ceramic bearings are available.

Supplied with 90 degree valve stems.

Fits:

BMW S1000RR - 2009 to 2018 (Standard Cast Wheel Setup Only!)
BMW S1000R - 2014 to 2018 (Standard Cast Wheel Setup Only!)

If you currently have the forged wheels on your BMW S1000RR / S1000R you will need a BST specific front rotor to install these wheels.  If you have the standard cast wheels, you may reuse the stock front rotors.  Stock rear rotors can be used with both stock wheel setups.

Note: All BST wheel sets include the sprocket carrier and hardware to install a sprocket, however sprocket is not included.  Needed sprocket specs are as follows 5 (10mm holes), PCD 100mm and Sprocket ID 76mm.

PCD - Pitch Circle Diameter
Sprocket ID - Sprocket Inner Diameter

Do not hesitate to contact us if you have any questions.