BT Moto (17-26) Triumph 765 Velocity Stack Airbox Kit

2017-2026 Triumph 765 Velocity Stack Kit

With the success and amazing feedback we've gotten from our Triumph flashes and velocity stacks in many competing markets, we wanted to turn our focus to getting into the engine in a more efficient way. Our custom revised velocity stacks and revised tuning not only give a very decent, top-end power increase, but also doesn't lose any power in the low or midrange of the RPM. Our easy to install, custom velocity stacks don't shift the powerband over and decrease power down low. We managed to make more power where it matters without sacrificing that torquey punch we've grown to love on the 765 platform.

Experimenting with many designs, we found a design that works perfectly for this bike. We spent months testing and developing this stack design, even testing competitor offerings to see how we could improve our own design. We ended up with a design that makes the best power for the 765 (see dyno tab). With our custom stack tuning, there's no need to worry about your bike having rideability issues either.

* V ELOCITY STACKS DO NOT REQUIRE FLASH PURCHASE BUT IT IS RECOMMENDED FOR ADVERTISED RESULTS*

Benefits

• Custom velocity stack designed for YOUR airbox. No one size fits all approach.
• OEM fitment and ability to go back to stock whenever you'd like. Plug and play
• Gain 8+HP (depending on bike and mods - must be coupled with rubber snorkel resonator removal and filter for best results) in the mid range and 5+HP at higher RPMs (with BT Moto Flash).
  

BT MOTO TRIUMPH VELOCITY STACKS

Custom composite with our logo and torqueing specs etched into them, the BT Moto Velocity Stacks have been carefully engineered and designed to maximize power in the higher RPM range while not losing power in the low RPM range.

Made for an OEM fit, the BT Moto velocity stacks bolt to the airbox to ensure tight fitment while also being easy to install. These are plug-and-play and require no additional modifications to your airbox to fit. Simply remove your factory velocity stacks and install. Coupled with our custom flash, the combination makes an extremely easy install and tune that can be done in your own garage, with basic tools and minimal mechanical knowledge.

***DISCLAIMER: FOR CLOSED COURSE COMPETITION USE ONLY. PENDING CARB APPROVAL. NOT INTENDED FOR STREET USE. PATENT PENDING***