BT Moto (20-22) BMW S1000RR (K67) Stage 1+ ECU Flash With Handheld Tuner

THIS PRODUCT IS 50-STATE LEGAL (C.A.R.B. EO# D-868-19)

MAKE SURE TO REVIEW THE TABS ABOVE: HANDHELD, DYNO RESULTS, RESOURCES AND MORE INFO!

The 20-22 K67 BMW S1000RR is a MAJOR change from the K46 platform! And while the bike is incredible all around, the US and European model S1000RR's have been restricted from the factory, not allowing you to unleash the full potential right from the dealer lot. The US models have worse restrictions than their European counterparts, but either will benefit tremendously from our Stage 1 ECU calibration . Our Stage 1 mapping was developed to remove these restrictions and unlock your BMW S1000RR’s full potential. The post-tuning changes on the BMW S1000RR are the most astonishing out of any BMW superbike to date! And a BT Moto flash is a must-have modification to an otherwise perfect motorcycle. See why we have calibrated tens of thousands of BMW S1000RR's and growing!

THE BT MOTO DIFFERENCE

We are obsessed with BMW motorcycles, and it shows. Thoroughly tested in all aspects by track racers, drag racers, or just the casual street rider wanting a more exciting bike to ride, our Stage 1 makes the bike how it should have come from the factory, and then some. We purchase the motorcycles and fully disassemble, diagnose, datalog, and test for every aspect of performance and rideability while keeping fuel economy, emissions, and engine reliability at stock or better levels! Our growing YouTube Channel has highlighted a lot of these changes and showcases our build series!

We have kept these bikes in our personal fleet since 2010, innovating cutting edge features and working on customer requests along the way. Our customers benefit from this process tremendously as things that bother them get brought to the forefront and fixed, making a more enjoyable riding experience. No one has more thorough research into making these bikes more enjoyable than us, with a money back guarantee. Be sure to reference our in-house YouTube reviews and testing for before and after horsepower gains, before and after acceleration testing and rideability quirk fixes that we complete with a third party on all bikes.

As a final point, we send out all our calibrations to be tested by CARB for government emissions compliance and third party verification. Before and after horsepower, along with tailpipe emissions, to get a certified EO number to be sold in California, a 50-state legal - as the California year-round riding and bike market is huge!

DRAG / ROLL RACERS / AND MAX SAFE ENGINE HORSEPOWER

Drag racers have the capability to ride derestricted, TC refined, and torque management maximized, allowing you to put the power down, gear after gear , without limitations . Because of our extensive factory ECU understanding and 100's of engine channels we've datalogged, we are able to adjust the ECU and engine far better than the competition who simply flatten fuel and advance ignition blindly.

We are uniquely setup to use the tools granted to us with the factory ECU to activate custom code like full-time closed loop , which utilizes factory sensors to "auto tune" the motorcycle at every throttle position without custom dyno mapping needed, adjust SOI (injector phase), rewrite spark maps per octane and address hidden torque maps to make sure the engine never holds back horsepower while not putting the bike outside its safety window. We also address additional safety functions to keep the engine reliable in extreme environments beyond factory tolerances.

We test the best and worst possible fuels and optimize all of them to the best of our abilities. Years of experience have helped us squeeze every bit of power from the bike, while keeping it reliable and consistent. Be careful with others claiming more power, as there is a delicate balance. Forced ignition advance, deleted knock control, disabled DTC tables, and lean air fuels are a short way to an expensive repair for 2HP.

TRACK RACERS

Track racers can enjoy modified TC (traction control) settings, wheelie management, adjustments for different tire sizes, smoother throttle transitions/tip-in , consistent and predictable power, and specialized tuning for specific tire sizes. All this comes together to make sure you start and finish a turn to the best of the bike's capability. Working directly with MotoAmerica racers and regularly datalogging all of the fastest stock ECU BMW S1000RR riders has opened a window and drastically improved our mapping and knowledge base to better help our customers perform properly on the track, keeping you ahead of the pack.

STREET RIDERS

For the casual rider, derestricting the bike is the biggest advantage of our tuning. This makes the bike a blast to ride and gives the rider smile-inducing power from one simple modification. Making sure the throttle is smooth when cruising and providing brutal power when you need it is important for all liter bike owners. Stop-and-go traffic or canyon carving on the weekends is where we put our development bikes to the test as they need to ride in low-speed situations, as well as work on the airstrip at wide-open throttle. Hundreds of hours and miles go into our tuning and testing, among several bikes, fuels, and test riders, before we ever release our product. We want to present the best product on the market while leading the pack in customer satisfaction.

No one tests as we do!

WHAT'S INCLUDED IN STAGE 1?

• De-restricted throttle, +60HP gains in the midrange (lower gears), and +20WHP over the curve!
• De-restricted exhaust valve open to 100% in certain riding scenarios for best sound and performance - no exhaust needed.
• Throttle response increased 12% in every "Race Pro" mode to reach a target of 100% throttle. Road mode desensitized for highway cruising, normally jerky and twitchy.
• Cruise control jerkiness adjusted for highway cruising tip-in.
  
• Revised fueling partial and full throttle for maximum economy, throttle response, and performance targets utilizing our 100 channel datalogging R&D.
• Second and third gear transmission limiter removed for full wheelie control and roll race hole shots (BT Moto exclusive).
  
• Enhanced and restructured hard cut RPM limiter for less drama at the bikes limit.
• Top speed limiter removed (dash still stops at 192MPH for now but can GPS verify faster).
• Mapping available for all popular modification combinations.
• Heat Management through better fueling, and lower cooling fan-on strategy.
• A second and a half off your 60-130MPH time!
• BMW "LOUD" STARTUP/SERVO IS LEFT INTACT ON STAGE 1
• Please note: Our stage 1 tuning is certified 50 state legal by CARB EO D-868. As of July 2025, we no longer offer extended rev limiter options on stage 1 tuning. Stage 1 is designed to for OEM dealer level serviceability and to abide by BMW's warranty standards.

HOW WE ACCOMPLISH THIS WITH STAGE 1

The purpose of this modification is to get a optimized factory-like bike at its power capabilities with or without hard parts all while maintaining factory reliability and emissions standards, if applicable, to your state or country.

• THROTTLE RESTRICTION / TORQUE / GEAR LIMITATIONS - We give you the ability to utilize 100% of the throttle . This is paramount in track or racing situations where you need all the power you can get. The factory file has "dead spots" that may cause the BMW S1000RR to behave in an unpredictable manner when corner exiting or hitting the throttle from a roll on. This also means any kind of straight line acceleration suffers, especially in high RPMs. Gain 60hp in 2nd and 3rd gear, and 20HP in others! We remove these factory restrictions to ensure a smooth and predicable throttle, all the way to redline. It's like getting a new bike, all over again!
• EXHAUST VALVE / INTAKE FLAP - The exhaust valve is a double edged sword. It does good by making back pressure when needed but also hinders the 20-22 BMW S1000RR from making the most power possible at mid to upper RPM ranges . The valve closed makes the bike a lot more quiet than if it were open, even slip-on exhaust sounds almost the same as stock due to this valve closing so much. Opening this valve for racing use allows for some horsepower gains, as this is gear and RPM dependent, just like the butterfly valves for the throttle. Lower gears have a smaller valve opening which will reduce overall volume and power by 3-5HP, even in lower RPMs. Our mapping still utilizes the stock exhaust valve to give you maximum power but also opens it up when you need it most. The intake valve is closed at certain RPMs from the factory, we open this fully to allow max airflow to the airbox at all times.
• FUELING - The 20-22 S1000RR fueling is rich for worldwide environment (desert) and longevity purposes, but we've found that it's complete overkill. It is also set artificially lean at idle, cruise, and warm up, which results in stalling and cold/hot start issues. The new BMW S1000RR is factory equipped with 5-wire widebands (just like the 2020+ GS1250 ) and is capable of targeting a specific AFR (Air/Fuel Ratio) through a closed loop corrective system from idle to redline. Being factory rich also helps it cool the "turtleshell" system for longest life and warranty free life. However, fuel can be trimmed safely for better result as it targets real time fuel corrections. Keep in mind that the factory tuning only utilizes closed loop very little!
• IGNITION - On the 2020 we adjust per cylinder corrections for maximum engine performance and increased torque and horsepower via steady state dyno tuning and datalogging verification for multiple fuels . We also keep safety maps active in case of poor fuel.  We do not overtime these engines blindly, as they do not respond well or make power from excessive ignition. What this means for the end user is automatic power increases with higher octane fuel in the bike, without changing mapping.
• HEAT MANAGEMENT - Lets face it, this bike rides a little on the hot side. Due to the new exhaust system and idle/cruise AFR mixtures the bike is a recipe to being constantly in the 215+F range and burning your legs while you ride, making it uncomfortable anywhere you’re not going 50+MPH. We have solved this issue by adding our low fan-on temp modification to this flash as a standard baseline feature, along with different cruise mapping which has curbed temps extensively.

STAGE 1 REVIEW

REAL WORLD RESULTS

Don't be fooled by imitations with empty promises, see why everyone uses us:

​